← How to use fpSupfpSup 怎麼用

Open Gate formatsOpen Gate 各格式

Five extra CinemaDNG resolutions — OG2K, OG3K, OG3.5K, OG4K and S16 — chosen in Settings and Quick Set next to UHD and FHD, all from one card. Version v0.1.2test. This is a test release: treat every take as disposable until you have checked it.

五個額外的 CinemaDNG 解析度 —— OG2K、OG3K、OG3.5K、OG4K、S16 —— 在 Settings 與 Quick Set 裡和 UHD、FHD 並排選,全部在同一張卡上。版本 v0.1.2test。
這是測試版:每段錄影在你檢查過之前,都當成可能不能用。

Thanks致謝

Thank you, Jose Hurtado感謝 Jose Hurtado

S16, OG3.5K and OG4K are Jose Hurtado's formats (fpSup-Formats v0.6.1): his timings, readout windows and canvas values are carried here unchanged, as data.

Jose's work also shaped the core that runs every format here:

The code is ours, written from source; the ideas above and the three formats' numbers are his.

Visit Jose's blog, El Cacharrista. His code is on GitHub: github.com/jahurtado.

S16、OG3.5K、OG4K 是 Jose Hurtado 的格式(fpSup-Formats v0.6.1): 他的時序、讀出視窗與畫布數值原封不動,以資料的形式帶過來。

執行所有格式的核心,也有很多地方來自 Jose 的研究:

程式碼是我們從原始碼寫的;上面這些構想與三個格式的數值是他的。

歡迎逛逛 Jose 的部落格 El Cacharrista。他的 GitHub:github.com/jahurtado。

First open gate on the SIGMA fp: Vitaly Li (FP3K).

SIGMA fp 第一個 open gate:Vitaly Li(FP3K)。

Install安裝

Checking the camera, copying the card and starting it: see the install steps on fpSup-Merge. What is particular to these formats:

確認相機、複製到卡、開機:見 fpSup-Merge 的安裝步驟。這幾個格式特有的部分:

  1. Pick the formats in fpSup-Merge在 fpSup-Merge 勾選格式

    Open fpSup-Merge with the Open Gate formats ticked. Every format is ticked by default; untick the ones you do not want (at least one must stay). You cannot add the older OG3K or OG2K cards, Jose's Formats card, or res-lab: they use the same parts of the camera. Download the zip.

    打開已勾好 Open Gate 各格式的 fpSup-Merge。 每個格式預設都勾著;不要的取消勾選(至少要留一個)。
    不能同時加舊的 OG3K / OG2K 卡、Jose 的 Formats 卡、res-lab:它們用的是相機的同一些地方。下載 zip。

  2. Keep the RESCUS folder別漏了 RESCUS 資料夾

    The formats live in fpSup/RESCUS/, one .RCD file each. Copy the whole fpSup folder with it. When you update the card, follow the install steps: an unticked format left on the card still loads.

    各格式在 fpSup/RESCUS/ 裡，每個格式一個 .RCD 檔。複製整個 fpSup 資料夾時要連它一起。更新卡時照安裝步驟做：沒勾的格式留在卡上仍會載入。

SD card / AutoRun.txt fpSup/ LOADER.BIN, UI/ 32RESCUS.BIN RESCUS/ OG2K.RCD OG35K.RCD OG3K.RCD OG4K.RCD S16.RCD 32RESCUS.BIN: all the program recording, menu, Quick Set, your last choice *.RCD: one format each, data only timings, sizes, menu text, its own icons delete one = that format is gone
What goes on the card. The program is one file; each format is one small data file. Up to six formats are used, in file-name order.
卡上放什麼。程式只有一個檔;每個格式是一個小資料檔。最多用六個,依檔名排序。

The formats各格式

format格式DNGaspect比例frame rates格率how做法12-bit 24p12-bit 24p
OG2K2000×13343:223.98–100sensor 3×3 binning感光元件 3×3 合併98 MB/s
S162096×123816:923.98–1001:1 window, about 2.9× crop1:1 視窗,約 2.9 倍裁切95 MB/s
OG3K3008×20003:223.98–100sensor 2×2 binning感光元件 2×2 合併219 MB/s
OG3.5K3456×23043:223.98–29.97full 1:1 readout, scaled in the ISP全 1:1 讀出,ISP 縮小287 MB/s
OG4K3840×25603:223.98–29.97full 1:1 readout, scaled in the ISP全 1:1 讀出,ISP 縮小354 MB/s

Storage speed. The UHS-II SD card we measured writes 94 MB/s; an external SSD 390 MB/s. OG3K, OG3.5K and OG4K need the external SSD. OG2K and S16 sit at the edge of an SD card: if it records normal FHD cleanly, try it. Too slow storage makes the camera stop recording after a few seconds.

儲存速度。我們量過的 UHS-II SD 卡寫入 94 MB/s,外接 SSD 390 MB/s。
OG3K、OG3.5K、OG4K 要用外接 SSD。OG2K 與 S16 剛好在 SD 卡的邊緣:能乾淨錄一般 FHD 的卡可以試。 儲存太慢,相機會在幾秒後停止錄影。

Bit depth (v0.1.3test). OG3.5K and OG4K can select 12-bit while retaining 8-bit and 10-bit. For 12-bit recording, use storage fast enough for the format; see the requirements above.

位元深度（v0.1.3test）。OG3.5K、OG4K 可選 12-bit，同時保留 8-bit、10-bit。 錄製 12-bit 時，需要速度足夠的儲存設備，需求見上方說明。

Use使用

1. Set the recording format to CinemaDNG.

1. 錄影格式設成 CinemaDNG。

2. Choose the format in MENU → recording → resolution or Quick Set → RES, then the frame rate and bit depth as usual.

2. 選格式:MENU → recording → resolution 或 Quick Set → RES, 格率與位元深度照平常選。

UHD FHD OG2K OG3.5K OG3K OG4K S16 camera's own added by the card, in file-name order (OG35K.RCD sorts before OG3K.RCD)
The resolution row with all five formats: seven states in Settings and Quick Set.
五個格式都裝上時的解析度一列:Settings 與 Quick Set 裡共七格。

Frame rates a format does not have are greyed out while it is chosen; your saved frame rate is kept and comes back with another resolution.

格式沒有的格率在選著它時會反灰;你存的格率會保留,換回別的解析度時回來。

Crop Mode: OG3.5K and OG4K follow it — Crop Mode on records the centre of the sensor 1:1 at the same DNG size. For OG2K, OG3K and S16 it is greyed out and off while they are chosen.

Crop Mode:OG3.5K 與 OG4K 跟著它 —— 開著時錄感光元件中央 1:1,DNG 尺寸相同。 OG2K、OG3K、S16 被選時它會反灰並關閉。

you choose OG4K camera stores: UHD (its own) 32RESCUS.BIN stores: OG4K without the card: UHD next start: OG4K again
How the choice is kept. The camera's settings only ever hold UHD or FHD; the format itself is remembered in the card's own file. Without the card the camera simply records UHD or FHD.
選擇怎麼保存。相機的設定只存 UHD 或 FHD;格式本身記在卡上自己的檔案裡。 沒有這張卡時,相機就單純錄 UHD 或 FHD。

What is tested and what is not測過什麼、沒測過什麼

Tested on a SIGMA fp, Ver.5.02 (earlier builds of this card):

在 SIGMA fp、Ver.5.02 上測過(這張卡較早的建置):

Not yet tested on the camera:

還沒在相機上測:

Remove — or drop one format移除 —— 或拿掉一個格式

Drop one format: delete its .RCD from fpSup/RESCUS. If it was the format you had chosen, the camera starts on UHD or FHD.

拿掉一個格式:把它的 .RCD 從 fpSup/RESCUS 刪掉。 若那正是你選著的格式,相機開機後會是 UHD 或 FHD。

Remove everything: choose UHD or FHD first, then delete 32RESCUS.BIN and the RESCUS folder. Did it the other way round? Nothing is broken: the camera only ever stored UHD or FHD.

全部移除:先選回 UHD 或 FHD,再刪 32RESCUS.BIN 與 RESCUS 資料夾。 順序反了?沒有東西壞掉:相機本來就只存 UHD 或 FHD。

If something does not work如果有東西不能用

what happens發生什麼what to do怎麼辦
No new formats in the list清單裡沒有新格式 The RESCUS folder is missing or not inside fpSup; or the card was started from an SSD. fpSup/LOAD.LOG says why (line OCD…).RESCUS 資料夾不見了或不在 fpSup 裡;或卡是從 SSD 開機。fpSup/LOAD.LOG 會寫原因(OCD… 那行)。
One format is missing少了一個格式 Its file is damaged, from a newer card, or a seventh one. Copy it again from the zip.它的檔案損壞、來自較新的卡,或是第七個。從 zip 重新複製。
Recording stops after a few seconds錄影幾秒後就停了 The storage is too slow — see the formats.儲存太慢 —— 見各格式。
The camera freezes相機凍結 With the USB cable unplugged, take the battery out. Bring what you were doing to the Discord.拔掉 USB 線,把電池拿出來。把當時在做什麼帶到 Discord 上說。